Like New: This open - box product shows no signs of use.
Peavey Classic 20 MH 20W Mini Head Tube Guitar Amplifier
Adored by blues, country, and rock musicians, Peavey Classic amps effortlessly cover a wide tonal range from vintage to modern sounds. The Classic 20 MH offers this amazing tone in a super - portable package.
The all - tube, 20 - Watt Classic 20 MH runs on two EL84 power tubes and three 12AX7/ECC83 preamp tubes. It has two channels with the same gain structure and voicing as Peavey Classic series amps, delivering pure and versatile tones. Both channels share a three - band EQ, rich reverb, and an effects loop. You can control the channels, effects loop, and reverb with a footswitch.
Peavey's TSI tube monitoring system tells you the status of your power tubes and pinpoints which tube needs replacement when necessary. Rear panel features like the Microphone Simulated Direct Interface (MSDI) with XLR output and USB out, speaker defeat switch, and 3 - position power attenuator switch make the Classic 20 MH mini head a great choice for studio work.
Key Features
- Attenuator switch for 20W, 5W, or 1W output power
- Two EL84 power tubes and three 12AX7/ECC83 preamp tubes
- Two footswitchable channels with 3 - band EQ
- Footswitchable global volume boost, reverb, and effects loop
- Comes with a footswitch
- Tube Status Indication (T.S.I. circuit)
- MSDI Output with XLR and ground lift switch
- USB Output
- Speaker defeat switch
- Headphone output
- Impedance switch for 16 or 8 ohm cabinets
- Unpacked weight: 16.75 lb (7.6 kg)
- Packed weight: 20.50 lb (9.3 kg)
- Packed width: 13.25" (33.655 cm)
- Packed height: 19.375" (49.2125 cm)
- Packed depth: 12.375" (31.4325 cm)
Using the Peavey Classic 20 MH 20W Mini Head Tube Guitar Amplifier is a breeze. First, connect your guitar to the input jack. You can choose between the two channels to get the tone you like. Use the three - band EQ to adjust the bass, mid, and treble. The footswitch lets you control the channels, reverb, effects loop, and global volume boost easily. For studio use, you can use the MSDI with XLR output or USB out. You can also use the speaker defeat switch and headphone output. When it comes to power, use the attenuator switch to select 20W, 5W, or 1W output. Make sure to keep an eye on the TSI tube monitoring system. If it indicates a tube needs replacement, follow the instructions to change the specific tube. For maintenance, keep the amplifier in a dry and clean place. Wipe it with a soft cloth regularly. When not in use, turn it off and unplug it to save energy and protect the tubes. Also, be careful when handling the amplifier as it's quite heavy, with an unpacked weight of 16.75 lb (7.6 kg).
