Product Detail
The Williams AV IR SY23 D is a top - notch commercial - grade large - area Dante infrared system. It comes with an IR+ transmitter, 2 emitters, an array, and Stethoset Receivers. This system includes an IR M1 D infrared modulator with Dante input, 2 IR E4 emitters, 1 IR A4 array, 5 IR RX20 receivers, 1 CHG 520 charger, and 1 IDP 008 ADA wall plaque. With dimensions of 19” (W) x 1.75” (H) x 8.2” (D) (48.3 cm x 4.5 cm x 20.8 cm) and weighing 5.2lb. (2.4 kg), it's a compact yet powerful solution. It features a wide range of functions like adjustable auto - carrier shut - off, dual IR LED for testing, and selectable carrier frequencies. The system has a high signal - to - noise ratio of 67 dB (typical) and a great frequency response from 40 to 16,000Hz. It's approved by CE, FCC, RoHS, and many other authorities and comes with a 2 - year warranty on the modulator and 90 days on accessories.
Using the Williams AV IR SY23 D is easy. First, connect the IR M1 D infrared modulator to your audio source with the Dante input. Then, connect the emitters and the array using the provided cables. Place the emitters in strategic locations to cover the desired area. The receivers can be distributed to users, and they can adjust the volume and frequency using the controls on the device. When it comes to charging, use the CHG 520 charger to charge the receivers. Make sure to operate the system within the temperature range of 0 - 50C in a non - condensing and non - corrosive atmosphere. For maintenance, keep the device clean and free from dust. Check the cables regularly for any signs of damage. If you have any issues, you can use the internal test tone and the remote configuration through the embedded website to diagnose the problem. Also, note that the warranty terms vary for different components, so take care of them accordingly.
