Whirlwind PCDI-HW DI with Hard Wired Tail Terminated with Stereo 3.5mm Plug

The Whirlwind PCDI - HW DI is a top - notch device featuring two separate DIs. You can input your signals in multiple ways: use the hard - wired 30 - inch 3.5mm (1/8') mini TRS stereo plug, two sets of color - coded RCA phono type input and through jacks, or 1/4' TS input jacks. The output is delivered via corresponding color - coded XLRs. Key features include color - coded RCA phono in/through jacks, a 30 - inch hard - wired cable with a 3.5mm input plug, 1/4' TS input jacks, color - coded XLR output jacks, a ground lift switch to reduce hum and buzz, a stereo/mono switch for different signal operations, a 20dB pad switch for 'hot' input signals, and it uses Whirlwind's TRHL - M transformers with a metal shield.

Using the Whirlwind PCDI - HW DI is easy. First, decide on your input method. You can use the 3.5mm plug at the end of the 30 - inch hard - wired cable, the RCA phono jacks, or the 1/4' TS input jacks. Connect your signal source accordingly. For the output, connect your device to the color - coded XLRs. When you notice some hum or buzz, flip the ground lift switch. If you're dealing with a very strong 'hot' input signal, use the 20dB pad switch. You can choose between stereo and mono operation using the stereo/mono switch. As for maintenance, keep it clean and dry. Avoid exposing it to extreme temperatures. If you encounter any issues, check all the connections first before seeking further help.