The Datavideo ITC - 300SL is a top - notch digital intercom belt pack. It features a special CAT - 6 connector shield, which effectively prevents cable disconnection during use. This belt pack comes with a call button and a talk button for easy communication. The 3.5mm stereo jack socket can be used for a headset with an impedance of 24 ohms and 100mW(min) power, and the microphone level is - 45.2 dB. It has a 3.5mm jack socket for the TD - 3 tally indicator, with clear pin definitions. The bi - color LED shows different states: red for live and green for cued. With a frequency response of 300 Hz to 7 KHz and less than +/-3dB variation, low THD of less than 0.1% at 1KHz, and a high S/N ratio of over 70dB, it offers excellent audio quality. It can operate up to 100m from the base station, in a temperature range of 0°C - 40°C (32°F - 104°F). It measures 81.2 x 142.6 x 49.6mm and weighs only 230g, powered by the base unit.
Using the Datavideo ITC - 300SL is easy. First, connect it to the base unit. The call and talk buttons are right there for you to communicate quickly. Plug your headset into the 3.5mm stereo jack socket. The tally indicator helps you know the status of your device. Just connect it to the 3.5mm jack socket. When it comes to temperature, make sure it's between 0°C and 40°C to keep it working well. Also, be careful with the cable, thanks to the special shield it's less likely to come loose, but still handle it gently. For maintenance, keep it clean and dry. If there are any issues, contact Datavideo support.
