The Atlas Sound AL - EAGLE is a top - notch two - channel infrared dome receiver. It's designed to pair seamlessly with Atlas Learn infrared microphones like AL - MAGPIE and AL - MYNA. With an RCA output, it can connect to nearly any local audio amplifier. This lets teachers and students move freely in the classroom while using the infrared microphones or system control units, and have their voices projected through the connected speakers.
Key Features:
- Works with secondary systems for better classroom security.
- Easily integrates into existing classroom sound reinforcement systems.
- Compatible with both AL - MYNA and AL - MAGPIE wireless infrared transmitters.
- Supports two separate transmitters with independent level/mix controls.
- Remote antenna input allows connection of a second AL - IRDS infrared dome sensor.
Technical Specifications:
LINE OUTPUT CONNECTOR: RCA
IR FREQUENCIES: 2.35mHz - 2.8mHz
LINE OUTPUT VOLTAGE: 1.3V
PSU TYPE: 100V - 240V In, 18VDC/1A Out
IR INPUT IMPEDANCE: 75
IR INPUT CONNECTION TYPE: F - Pin Connector
INDICATOR LEDS: Power, RF A, RF B
HEIGHT: 7.75' (19.69cm)
WIDTH: 3.33' (8.46cm)
DEPTH: 2.50' (6.35kg)
WEIGHT: 0.5 lbs. (0.23kg)
Using the Atlas Sound AL - EAGLE 2 - Channel Infrared Dome Receiver is easy. First, connect it to your local audio amplifier using the RCA output. Then pair it with your Atlas Learn infrared microphones such as AL - MAGPIE or AL - MYNA. You're all set to enjoy free movement in the classroom with clear voice projection.
When using it, make sure the power supply is within the specified range of 100V - 240V. Also, keep an eye on the indicator LEDs to know the status of the receiver.
For maintenance, keep the receiver clean and dry. Avoid exposing it to extreme temperatures or humidity. If you need to connect a second AL - IRDS infrared dome sensor, use the remote antenna input. That's all you need to know to get the most out of your receiver.
