Product Detail
The Original 1992 Peavey 6505 is an outstanding guitar amplifier head crafted after extensive R & D. It's designed to deliver the ultimate rock 'n' roll experience. This amp offers super rock crunch, harmonic - rich sustain, and a screaming metal drive that's unlike anything you've ever heard from other amps. It's the top choice for countless rock, hardcore, and metal bands, thanks to its raw tone, unwavering power, and proven reliability on the road. The 6505 comes equipped with five 12AX7 preamp tubes and four 6L6GC power amp tubes. It features presence and resonance controls, along with a three - band EQ to fine - tune its well - known tone. With its classic ultra - high gain preamp and a monstrous 120 W power section, it has an amazing stage presence and enough volume for any gig. For added flexibility, it includes a footswitchable effects loop, preamp output, and bright/crunch voicing switches on the rhythm channel. The 6505 stands in a league of its own due to its unique design and distinct tone.
**Key Features**
- 120 watts (rms) switchable into 16, 8, or 4 ohms.
- Two - channel preamp switchable on the front panel or via a remote footswitch.
- Rhythm channel: pre - /post - gain, bright and crunch switches.
- Five 12AX7 preamp tubes and four 6L6GC power amp tubes.
- Shared 3 - band EQ for both channels.
- High and low gain inputs.
- Presence and resonance controls.
- Switchable post - EQ effects loop.
- Preamp output.
- Footswitch included.
- Lead channel: pre - /post - gain.
- Universal AC Input Selector for global use.
**Technical Specifications**
- **Power Amplifier Section**: Rated 120 W RMS into 16, 8, or 4 ohms. Power at clipping is typically 130 W RMS. Frequency response is +0, - 3 dB from 50 Hz to 20 kHz at 100 W RMS into 8 ohms. Hum & Noise is greater than 75 dB below rated power. Power Amp EQ has active presence and resonance controls. Power consumption is 400 watts at 50/60 Hz, 120 V AC.
- **Preamp Section**: Measured at 1 kHz with specific control presets. Different input levels for lead and clean channels. Effects send and return with specific impedance and output levels. Preamp output has a load impedance of 47K ohms or greater and a nominal output of +10 dBV, 3 V RMS. Remote footswitch is a special 2 - button unit with LED indicators for channel select and effects loop bypass. System hum & noise on the clean channel is greater than 74 dB below rated power. Equalization includes custom low, mid, and high passive type EQ, with bright and crunch options on the rhythm channel.
Using the Peavey 6505 guitar amplifier head is a breeze. First, make sure you've connected it to a suitable power source using the universal AC input selector, which works worldwide. Then, plug your guitar into either the high - gain or low - gain input depending on your preference. You can switch between the two channels on the front panel or use the included footswitch. On the rhythm channel, play around with the bright and crunch switches to get different tones. Adjust the 3 - band EQ, presence, and resonance controls to fine - tune your sound to perfection. The effects loop is great for adding external effects; just use the footswitch to bypass it when needed. When it comes to maintenance, keep the amplifier in a clean and dry place. Don't expose it to extreme temperatures or humidity. Periodically check the tubes to make sure they're functioning properly. If you notice any strange noises or performance issues, it's best to have it checked by a professional. Remember, this amp is powerful, so don't turn the volume up too high in small spaces to avoid potential damage to your ears and the amp itself.
