The EMG H1-B Bridge Humbucking Passive Guitar Pickup with standard spacing is a game - changer. It uses EMG's advanced technology while retaining the warm presence and open sound of the finest vintage humbuckers. With over - wound coils and ceramic magnets, it offers the punch and brilliance typical of classic passive humbuckers. The H1 - N for the neck position has amazing clarity, and the H1 - B in the bridge position effortlessly delivers well - defined crunchy lead sounds from your guitar. When used together, they're perfect for creating 60’s and 70’s rock tones. And thanks to EMG's solderless installation system, swapping these pickups is a breeze. The package includes EMG's exclusive solderless install system: 1 500K volume pot, 1 500K tone pot, 1 mono output jack, 1 two - pickup in/out bus, 1 pair of mounting screws and springs, 1 pickup cable, 2 connect cables, 1 output cable, and 1 ground cable.
Using the EMG H1 - B guitar pickup is straightforward. First, take out all the components from the package. With the solderless install system, you don't need to worry about soldering. Just connect the 500K volume pot, 500K tone pot, and mono output jack as per the provided instructions. Then, use the mounting screws and springs to attach the pickup to your guitar's bridge position. Connect all the cables, including the pickup cable, connect cables, output cable, and ground cable properly. When using it, adjust the volume and tone pots to get the sound you like. For the H1 - N neck pickup, if you're using it in combination, install it in the neck position in a similar way. As for maintenance, keep your guitar and pickups clean. Wipe them gently with a soft cloth after each use to remove dust and sweat. Avoid exposing them to extreme temperatures and humidity, as this can affect their performance. If you have any issues during installation or use, refer to the included instructions or contact EMG's customer service.
